Hi,

Please refer to the links:

1. https://www.odoo.com/documentation/18.0/applications/inventory_and_mrp/manufacturing/basic_setup/three_step_manufacturing.html

2. https://www.youtube.com/watch?v=qqNEEBNtArA

3. https://www.youtube.com/watch?v=3ZrpCqLjOIY

4. https://www.cybrosys.com/slides/how-to-configure-manufacturing-in-3-steps-in-odoo-17

Hope it helps.

You might want to validate the source and destination location set on the Manufacturing operation.

Believe they need to be pre-production and post production.

From your post it seems the push rule didn’t trigger post MO production either

Hi Rani, It persists :)). And thanks for the reminder of the inventory adjustments. There was indeed a MO trail not unbuild to restore the stock. But that didn't solve unfortuanally the triggering issue. But the most fuzzy thing I see on the smart button shopfloor is a Workcentre (for the MO) which is not on operation of the MO AND what is archived!!! 

It seems you're encountering issues with the 2-step manufacturing route in Odoo v18, where the initial picking is not triggered as expected. Here's a brief guide to troubleshoot and potentially resolve this issue:

  Ensure the manufacturing order (MO) is confirmed. Only confirmed MOs trigger the pull rules.

  Check if the product's routes are correctly configured to include the 3-step manufacturing process. Misconfiguration can lead to the system not recognizing the need to trigger the first pull rule.

  Verify the stock rules and ensure they are active. Inactive rules or incorrectly set conditions might prevent the triggering of the initial stock move.

  Review the inventory adjustment for the pre-production location. Negative stock levels might indicate previous transactions that need to be corrected.

  If the issue persists, consider consulting the Odoo logs for errors related to the workflow or rules execution. This can provide specific insights into what might be going wrong.

For personalized assistance:
https://www.pragtech.co.in/contact.html